uedbet悶圄

Setup as front page Add to favorites traditional Chinese English
product search



Electric heating belt Electric hotline Heating plate Floor heating High temperature line Heating mat Mineral insulated heating cable Heating cable application system other


Gutter snow melting heating cable
Release time: 2014-09-29 11:07:09 | Browse times:

天沟融雪伴热电缆 Product Number: 006
Product name: Gutter snow heating cable <br> Specification: 0
Product Remarks: If there are special requirements, please specify in the order contract <br> Product Category: Special electric heating belt

In northern China, the amount of snowfall in winter is very high, and the snow accumulated in the roof gutter is covered by new rain and snow before it melts, which brings challenges to the roof's load capacity over time. Moreover, due to the internal structural problems and the limited load-bearing capacity of the roof, there is too much snow on the roof and it can not be cleaned in time. When the snow accumulates too much, it will cause the roof to tilt or collapse, which will cause people's safety Harm. For the snow on the roof gutter, we recommend using heat tracing cables to clear snow and ice in a timely manner.

1. Tinned round copper wire 2. Core insulation layer 3. Inner sheath insulation 4. Metal braid 5. Outer sheath

Safety: The efficient and convenient drainage system can prevent damage to the roof gutter and sewer pipes, and ensure that the roof is not frozen with snow, icicles.

Automatic: It can automatically detect the dissolution requirements in the work area and start and close in time.

Economic and reasonable: The installation and use costs of this system are very economical, avoiding damage and maintenance caused by accidents, and ensuring service life.

Environmental protection: This system uses the cleanest and most efficient electrical energy, which is loved by users.

The gutter snow melting system uses a snow melting sensor to achieve automatic. The snow melting sensor can automatically detect the snow and ice signal in the gutter. When the temperature is lower than 0 degrees Celsius, the snow melting sensor is turned on. Until the snow melting controller starts the gutter snow melting board to start heating the snow melting. When there is no snow or snow in the gutter or the temperature is higher than 0 degrees Celsius, the gutter snow melting board stops working. The water and icing parts are laid, so that the roof drainage ditch is always kept unblocked, no ice is formed, and electric energy is saved as much as possible to achieve an economical and practical effect.

The above guarantees that the heating cable can better prevent the hidden danger of water leakage and leakage of the cold wire cable connector, and maintain the continuity of the metal electromagnetic shielding. The internal structure of the cable is more precise, and the heating is more uniform and faster.



Home | Company Profile | News Center | Products Center | Technical Articles | Recruitment | Contact Us
Shanghai Yinxi Temperature Measuring Equipment Co., Ltd.
pklady.com Copyright ? 2014-2015. All Rights Reserved. 沪 ICP 备 14034030
Tel: 021-63167887 Mobile: (0) 13952613181 Fax: 021-63167887 Company Address: Room 174, 2nd Floor, Building 5, No. 3688, Tingwei Road, Haojiao Town, Jinshan District, Shanghai